Additional information
| Weight | 1 lbs |
|---|
NSI Solutions 3″ Rapid Z™-DRUM – Coarse
$259.95
A 3″diameter vacuum brazed drum wheel, specifically designed for use with the Sink BULL™. Available in two grits with a top bearing to ride along the template. The coarse grit cleans up the rough surface left by the Rapid Z™-CUT and the fine grit further smooths the surface leaving it ready to polish. This is the only vacuum brazed drum wheel with reversible and replaceable drums. The height matches the Rapid Z™-CUT so height adjustments on the Sink BULL are not required between bits. It is center water feed compatible (note: the Sink BULL™ does not use center water feed).
Fits 5/8-11 arbor threads (M14 version available)
Reversible, and replaceable diamond abrasive drum
height matched to the Rapid Z™-CUT
Center water feed compatible
Maximum RPM 8500
Coarse grit = approximately 30/40 grit
Fine Grit = approximately 120/150 grit