Additional information
| Weight | 1 lbs |
|---|
Includes 1 oz bottle of glue, a notched razor blade, printed instructions. Request full instructions sheet. Sand steel and rubber with clean sand paper. To remove grease, fingerprints, and old adhesive from the tracks, acetone may be used. NOTE: Acetone residue will negatively affect the new adhesive bond. For this reason it is VERY IMPORTANT, just prior to gluing, to use a clean rag and Electrical Contact Cleaner (or isopropyl alcohol) to thoroughly clean the rubber and the tracks. A 1oz bottle of glue should cover approximately 16' of individual track (or a set of 7.5' tracks).Glue Kit for EDM Rubber (1 oz bottle and notched blade)
$15.00
Includes 1 oz bottle of glue, a notched razor blade, printed instructions. Request full instructions sheet. Sand steel and rubber with clean sand paper. To remove grease, fingerprints, and old adhesive from the tracks, acetone may be used. NOTE: Acetone residue will negatively affect the new adhesive bond. For this reason it is VERY IMPORTANT, just prior to gluing, to use a clean rag and Electrical Contact Cleaner (or isopropyl alcohol) to thoroughly clean the rubber and the tracks. A 1oz bottle of glue should cover approximately 16′ of individual track (or a set of 7.5′ tracks).