AGX Profiler B Series – Demi Bullnose Profile – B15 (1/2″ Roundover) and B20 (3/4″ Roundover; Half Bullnose on 2cm) – Position 1 (Coarse Grit). 5/8”-11 Grinder thread for variable speed wet polisher machines.
Use this premium diamond bit to make a 1/2″ or 3/4″ roundover demi bullnose profile edge on 2cm or 3cm stone. This bit can be used for shaping the edge of granite, quartz, marble and other stones. It comes equipped with an easy-to-use guide that keeps the bit on plane with the top surface of the stone. Also, the cut depth control bearing, on the bottom of the bit, prevents cutting after the desired profile shape is achieved – which means ripple free profiles every time. Use with water.
This AGX Profiler B Series bit – for hand profiling – is a great option for creating a demi bullnose profile on a budget. However, if you are doing a substantial amount of demi bullnose shaping, you’ll definitely want to upgrade to the GHINES SECTOR Router and APEXX Profile Router Bits for vastly improved efficiency, speed and edge quality.