OMNI CUBED Pro-Anchor™ T-31 Anchor Machine: EV (Electric with Vacuum). The Pro-Anchor™ T-31 Anchor Machine is used to easily and precisely cut curved T-slots in the back side of stone pieces for the attachment of anchor bolts used in bottom-mount sink or architectural facing systems.
The machine features a split-clamp design for optimum grinder stability (unlike weak set-screw holders on other anchor machines). Two separate vacuum zones on the base can be turned on or off, enabling the machine to be used near cut outs or edges (i.e. the entire vacuum base does not have to be in contact with the surface). The vacuum base seal is cut as one piece of neoprene foam; this “seamless” design provides a superior leak-free seal with the stone to guarantee minimal air consumption.
The machine also features industrial quick-couplers for both air and water, and the efficiently designed venturi vacuum generator creates high vacuum pressure with very low air consumption (only 0.5 SCFM). The machine cuts in both push and pull direction, and the water hose with ball valve and quick-coupler can be easily detached to spray the work area. The grinder accepts any T-31 anchor bit with ¼” shank.
One-year manufacturer’s limited warranty on all non-grinder parts; grinders are covered under their respective manufacturer’s warranties.
Includes one Pro-Anchor machine with vacuum base, one electric Makita grinder, one GFCI outlet adapter, one water hose, two wrenches, one storage case.
Specifications: Weight: 13 lbs; Package Size: 20″ x 20″ x 6″; Collect Capacity: 6.35 mm (0.25in); No Load Speed: 25,000 RPM; Grinder: Makita, 3.5 Amp, 120 Volt AC, 60 Hz, North America Plug; Water Connection: Garden Hose Thread, GHT 1.0625in x 11.5 TPI; Air Connection: 0.25in Industrial Series Coupler Plug; Vacuum Base: 20 inHg Vacuum, 0.5 SCFM Air Consumption at 80 PSI; Materials: Anodized Aluminum, Aluminum, Stainless Steel, Brass, Plastic, Foam.
- Weight: 13 lbs
- Package Size: 20″ x 20″ x 6″
- Collect Capacity: 6.35 mm (0.25in)
- No Load Speed: 25,000 RPM
- Grinder: Makita, 3.5 Amp, 120 Volt AC, 60 Hz, North America Plug
- Water Connection: Garden Hose Thread, GHT 1.0625in x 11.5 TPI
- Air Connection: 0.25in Industrial Series Coupler Plug
- Vacuum Base: 20 inHg Vacuum, 0.5 SCFM Air Consumption at 80 PSI
- Materials: Anodized Aluminum, Aluminum, Stainless Steel, Brass, Plastic, Foam