ACCUGLIDE Pro-Fence™ Attachment

PROFA ACCUGLIDE Pro-Fence™ Attachment

$ 680.00 (saw not included)

Key Features

AccuGlide ProFence

  • Ripple free profiling
  • Bevel & Bullnose
  • Aggressive stock removal

Clean and ripple free profiling and chamfering and aggressive stock removal are easy and economical with the ProFence Attachment. The ProFence is fully adjustable and attaches quickly to your 3000PRO Stone Saw. With the ProFence in place, you can follow the edge of the work-piece perfectly, without tracks. The included counterweight keeps the whole assembly in perfect balance for maximum control with minimum effort. Leveling feet are built into the counterweight to keep the saw on the correct plane at the beginning and end of the operation for a consistent profile. Laser-cut stainless, anodized aluminum, powder coated steel and brass construction for long life.

  •     1/8-5/8" Bevel Profile Wheel available
  •     1/8 -3/8" Demi Bullnose Profile Wheel available
  •     Low tooling cost per foot compared to router or hand shaping!

Why use the AccuGlide ProFence & Profile Wheel to shape your simple edges?

Speed, Quality & Higher Profits:

Shape a 3/8" Bullnose at 2 ft per minute! Twice as fast as a skilled worker hand bullnosing at the rate of 1 ft per minute.

With a clean, CNC quality profile you will also reduce polishing time by 20-30%.

Here is an example of the savings you could be profiting from:

If you profile one kitchen containing 60 ft of 3/8" Bullnose, you could save half an hour per kitchen. You can also  move through the first two polishing stages faster, saving another 30 minutes per kitchen.

Savings = 1 hour per kitchen

At 5 kitchens per week you saved 260 hours in one year

If the final cost of your employee is 16.00 per hour you have saved 4160.00 in one year!